Falcon SP2 2.1 Shock Absorber Kit - Jeep JL
Falcon SP2 2.1 Monotube Shocks by TeraFlex deliver increased stability, improved ride quality, and comfort for daily driven Jeeps in a compact and affordable package. Our unique Mode Adjust feature tunes compression and rebound for Soft or Performance settings. SP2 2.1 Shocks have been optimized for on- and off-road driving.
Mode adjust shcks give the choice of setting the Falcon shocks base tuning to Performance or Soft/Cold. This choice is made during installation but can be changed later if so desired. You can change the mode by rotating the shaft (lower shock eye).
Mode adjust shcks give the choice of setting the Falcon shocks base tuning to Performance or Soft/Cold. This choice is made during installation but can be changed later if so desired. You can change the mode by rotating the shaft (lower shock eye).
Höjd
Pris
0-1,5"
12 200 SEK
2-3,5"
12 200 SEK
- Betala säkert med kort
- Kontakta oss om du har frågor!
Beskrivning
Art.nr: X3
Modes specs:
* Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
* Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss
“High-Value Performance” is the driving force behind our vehicle-specific Falcon shocks for Jeeps, trucks, and SUVs. These Jeep-specific shock absorbers deliver increased stability, improved ride quality, and comfort for daily driven vehicles as well as race-inspired performance, handling, and stability for off-road rigs.
Specs:
SP2 mode adjust shocks add Soft and Performance modes
Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss
Falcon Series 2.1 Monotube Shock Absorbers deliver increased stability, improved ride quality, and comfort for daily driven Jeeps in a compact and affordable package
Jeep Wrangler JL corner-specific shock absorber
Rear roost guards prevent shock shaft damage from rocks kicked up by the tires
Race-inspired performance for increased vehicle stability
Volume Optimized Damping (VOD) for quicker ramp up and increased damping volume
Optimized fitment for clearance during full suspension travel and articulation
6061-T6 aluminum alloy shock body resists wear & protects internal components while providing superior heat dissipation
Smooth honed internal shock body surface for long-term performance
2.25” shock body provides optimal performance
3/4” induction hardened chrome plated shaft resists rock damage & corrosion as well as prevents shaft buckling
Maximum shaft diameter allows for more precise tuning
Hard anodized billet piston
1-piece Teflon bronze piston wear band w/ O-ring
Digressive linear piston & base valve technology
Inline OGS Oil/Gas Separator prevents cavitation
Red Line full synthetic shock oil w/ high viscosity index of 519 for consistent performance across all temperatures & reduced shock fade
Synthetic formula also contains special anti-wear & lubricity agents for excellent thermal stability
1,000-hour salt spray corrosion resistance test on all hardware
Serviceable & rebuildable (factory serviced)
Built in-house at the TeraFlex Falcon Shocks Division
In the box:
SP2 2.1 Monotube Shocks - all 4
Rear roost guards - pair
All necessary hardware
* Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
* Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss
“High-Value Performance” is the driving force behind our vehicle-specific Falcon shocks for Jeeps, trucks, and SUVs. These Jeep-specific shock absorbers deliver increased stability, improved ride quality, and comfort for daily driven vehicles as well as race-inspired performance, handling, and stability for off-road rigs.
Specs:
SP2 mode adjust shocks add Soft and Performance modes
Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss
Falcon Series 2.1 Monotube Shock Absorbers deliver increased stability, improved ride quality, and comfort for daily driven Jeeps in a compact and affordable package
Jeep Wrangler JL corner-specific shock absorber
Rear roost guards prevent shock shaft damage from rocks kicked up by the tires
Race-inspired performance for increased vehicle stability
Volume Optimized Damping (VOD) for quicker ramp up and increased damping volume
Optimized fitment for clearance during full suspension travel and articulation
6061-T6 aluminum alloy shock body resists wear & protects internal components while providing superior heat dissipation
Smooth honed internal shock body surface for long-term performance
2.25” shock body provides optimal performance
3/4” induction hardened chrome plated shaft resists rock damage & corrosion as well as prevents shaft buckling
Maximum shaft diameter allows for more precise tuning
Hard anodized billet piston
1-piece Teflon bronze piston wear band w/ O-ring
Digressive linear piston & base valve technology
Inline OGS Oil/Gas Separator prevents cavitation
Red Line full synthetic shock oil w/ high viscosity index of 519 for consistent performance across all temperatures & reduced shock fade
Synthetic formula also contains special anti-wear & lubricity agents for excellent thermal stability
1,000-hour salt spray corrosion resistance test on all hardware
Serviceable & rebuildable (factory serviced)
Built in-house at the TeraFlex Falcon Shocks Division
In the box:
SP2 2.1 Monotube Shocks - all 4
Rear roost guards - pair
All necessary hardware